S10 CONTROL ARMS : 1982-2004

THIS ITEM IS BUILT TO ORDER. PLEASE CONSIDER THAT IT WILL TAKE SOME TIME TO PRODUCE. NO REFUNDS. THANK YOU. 

These S10 control arms were designed to help correct ball joint angles and help eliminate camber issues.  The Lower control arms are built from 1.5 DOM tubing with a .188 wall thickness and the upper control arms are built from 1.25  DOM with a .188 wall thickness. The control arms come with durable polyurethane bushings and brand new ball joints. 

 These control arms move the wheel 1 inch forward to help center the wheel in the wheel well.  (Unless customer specify)

We can build these arms longer for customers using them on the 1950s Chevy trucks.  Link to the 50s swap arms below (These arms do not move the wheel forwards)

https://www.nfamusmetal.com/s10-frame-swap-50s-chevy-trucks/

Includes the Following:

2 - Upper Control Arms 

2 - Lower Control Arms

8 - Polyurethane Bushings

4 - Upper and Lower Ball Joints

Upper Bag Cups with hardware (Mounting the Airbag)

These arms will also fit all the S10 blazers (2 door and 4 door)