88-98 CHEVY 1/2 TON CONTROL ARMS (SET)

THIS KIT IS BUILT TO ORDER. PLEASE CONSIDER THE TIME IT TAKES TO PRODUCE. 

Our 88-98 Chevy upper and lower control arms are designed to help center the wheels and in most cases we narrow the arms 1 inch per side to help with your track width and make turning easy when low and tucking(This is generally how we have them on the shelf).  The arms also help correct the ball joint angles to eliminate binding.  The Upper control arms are built from 1 1/4 inch DOM tubing with a .188 wall thickness.  The lower control arms are built from 1 1/2 inch DOM tubing with a .188 wall thickness.  Our Jigs are fully adjustable so that we can also build the arms to whatever length you prefer depending on your wheels and offsets.  The arms are also designed to help eliminate as much of the camber as possible and still keep the geometry correct.

A couple itmes you may want to purchase with the arms is our 88-98 CHEVY STEERING KIT and SHOCKET POCKETS

INCLUDED:

2 Upper Control Arms

2 Lower Control Arms

2 Upper Ball Joints

2 Lower Ball Joints

8 Polyurethane Bushings and Inner Sleeves  

2 Upper Bag Mounts

These control arms do work on the Suburbans and Tahoe models

2WD MODELS ONLY:  These arms do not work on the 4wd models 

LINK TO INSTALL:

 88-98 Chevy Control Arm Install - NFAMUS GALLERY (smugmug.com)

** PLEASE READ** 

Nfamus Metal is a small business that fabricates high quality products that take time to produce. Majority of our kits listed are built to order due to different specifications customers have for their vehicle. 

.