THIS IS A CUSTOM KIT AND IS BUILT TO ORDER. NO REFUNDS.
This is our 2009+ Ram front suspension kit we offer. This kit is designed to lay up to a 34 inch tall tire in the front but requires a hefty amount of cutting. The kit centers the wheel in the wheel well and also narrows the track width to help with fender clearance and turning low. On these trucks to make it lay frame you will need to raise the rack and pinion 1 inch and shave the front crossmembers. We have added photos on this being done in the install pics in the link below. On some of the newer models you will need an oil filer relocation kit. Here is the link to the one we use when doing these trucks Oil Filter Relocator . The upper control arms on this kit are built from 1 1/4 DOM tubing with a .188 wall thickness. The lower control arms are built from 1 1/2 DOM tubing with a .188 wall thickness. We send a complete new steering setup that's been machined to narrow the track width and work with the control arms to eliminate bump steer and tow issues. We Recommend running the SLAM Re7 airbags with this kit.
LINK TO INSTALL: https://nfamusgallery.smugmug.com/TECH-PHOTOS/2009-RAM-FRONT-KIT-/
INCLUDES:
2 - Upper Control Arms
2 - Lower Control Arms
8 Polyurethan Bushings
4 - Ball Joints (Upper/Lower)
1 - Complete Steering Kit
2 - Upper/Lower Shock Mounts
8 - Upper Control Arm Tabs
2 - Upper Bag Plates with Gussets
1 - Hardware Kit
